Joule-Thomson effect/Citable Version: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Hayford Peirce
 
imported>Hayford Peirce
(saved step three)
Line 1: Line 1:
#REDIRECT [[Joule-Thomson effect/Draft]]
{{subpages}}
{{TOC|right}}
 
The '''Joule-Thomson effect''' or '''Joule-Kelvin effect''' describes the increase or decrease in the [[temperature]] of a real [[gas]] (as differentiated from an [[Ideal gas law|ideal gas]]) or a [[liquid]] when allowed to expand freely through a [[valve]] or other [[throttle (engineering)|throttling]] device while kept insulated so that no [[heat]] is transferred to or from the [[fluid]], and no external [[Mechanical work|mechanical work]] is extracted from the fluid.<ref name=Roy>{{cite book|author=Bimalendu Narayan Roy|title=Fundamentals of Classical and Statistical Thermodynamics|edition=|publisher=Wiley|year=2002|id=ISBN 0-470-84313-6}}</ref><ref name=Edmister>{{cite book|author=Wayne C. Edmister and Byunk Ik Lee|title=Applied Hydrocarbon Thermodynamics|edition= 2nd edition (Volume 1)|publisher=Gulf Publishing|year=1984|id=ISBN 0-87201-855-5}}</ref><ref name=Ott>{{cite book|author=J. Bevan Ott and Juliana Boerio-Goates |title=Chemical Thermodynamics: Principles and Applications|edition=1st Edition|publisher=Academic Press|year=2000|id=ISBN 0-12-530990-2}}</ref><ref name=Perry>{{cite book | author=Perry, R.H. and Green, D.W. | title=[[Perry's Chemical Engineers' Handbook]] | publisher=McGraw-Hill Book Co | year=1984 | id=ISBN 0-07-049479-7}}</ref> The Joule-Thomson effect is an ''[[isenthalpic process]]'', meaning that the [[enthalpy]] of the fluid is constant (i.e., does not change) during the process. 
 
It is named for [[James Prescott Joule]] and [[William Thomson, 1st Baron Kelvin]] who established the effect in 1852, following earlier work by Joule on [[Joule expansion]] in which a gas expands at constant [[internal energy]].<ref>{{cite journal| author=J. P. Joule and W. Thompson|title=On the Thermal Effects of Fluids in Motion (Part I)|journal=Philosophical Transactions of the Royal Society of London|volume=143|issue=| pages=357-366|date=1853|id=|url=http://dx.doi.org/10.1098/rstl.1853.0014|doi=10.1098/rstl.1853.0014}}</ref>
The Joule-Thomson effect is sometimes referred to as the ''Joule-Kelvin effect''. Engineers often refer to it as simply the ''J-T effect''.
 
There is no temperature change when an ideal gas is allowed to expand through an insulated throttling device. In other words, the J-T effect does not apply for ideal gases.
 
==Joule-Thomson inversion temperature==
 
[[Isentropic|Isentropic expansion]] (meaning an expansion at constant [[entropy]]) &mdash; in which a gas does positive work in the process of expansion, &mdash; always causes a decrease in the gas temperature. For example, when gas is expanded through an [[expansion turbine]] (also known as a ''turboexpander''), the temperature of the gas always decreases.
 
However, when a real gas (as differentiated from an ideal gas) expands through a throttling device, the temperature may either decrease or increase, depending on the initial temperature and [[pressure]].  For any given pressure, real gases have a '''Joule-Thomson inversion temperature''':<ref name=Roy/><ref name=Ott/> above which the J-T expansion causes the temperature to rise, and below which the J-T expansion causes cooling. For most gases at [[atmospheric pressure]], the inversion temperature is fairly high (above [[room temperature]]), and so most gases at those temperature and pressure conditions are cooled by the J-T expansion.
 
==The Joule-Thomson coefficient==
 
The change of temperature ('''''T'''''&nbsp;) with a decrease of pressure ('''''P'''''&nbsp;) at constant [[enthalpy]] ('''''H'''''&nbsp;) in a Joule-Thomson process is the '''Joule-Thomson coefficient''' denoted as <font style="vertical-align:-10%;"><math>\mu_{JT}</math></font> and may be expressed as:<ref name=Edmister/><ref name=Ott/><ref name=Perry/><ref>[http://www.chem.arizona.edu/~salzmanr/480a/480ants/jadjte/jadjte.html Joule Expansion] (by W.R. Salzman, Department of Chemistry, [[University of Arizona]])</ref>
 
:<math>\mu_{JT} = \left( {\partial T \over \partial P} \right)_H</math>
 
The value of <font style="vertical-align:-10%;"><math>\mu_{JT}</math></font> is typically expressed in [[Kelvin|K]]/[[Pascal (unit)|Pa]] or [[Celsius|°C]]/[[bar (unit)|bar]] and depends on the specific gas, as well as the temperature and pressure of the gas before expansion.
 
For all real gases, it will equal zero at some point called the '''inversion point''' and, as explained above, the '''Joule-Thomson inversion temperature''' is the temperature where the coefficient changes sign (i.e., where the coefficient equals zero).  The Joule-Thomson inversion temperature depends on the pressure of the gas before expansion.
 
In any gas expansion, the gas pressure decreases and thus the sign of <math>\scriptstyle \partial P</math> is always negative. With that in mind, the following table explains when the Joule-Thomson effect cools or heats a real gas:
 
{| class="wikitable"
!If the gas temperature is!!then <math> \mu_{JT}</math> is!!since <math>\scriptstyle \partial P</math> is!!thus <math>\scriptstyle \partial T</math> must be!!so the gas
|-
|align=center|below the inversion temperature||align=center|positive||always negative||align=center|negative||align=center|cools
|-
|align=center|above the inversion temperature||align=center|negative||always negative||align=center|positive||align=center|heats
|}
 
For some gases, the Joule-Thomson inversion temperatures at 1 [[atmosphere (unit)|atm]] are very low: for [[helium]], about 51 K (−222 °C), and for [[hydrogen]], about 202 K (-71 °C).  Thus, helium and hydrogen will warm during a J-T expansion at typical room temperatures.  On the other hand, [[nitrogen]] has an inversion temperature of 621 K (348 °C) and [[oxygen]] has an inversion temperature of 764 K (491 °C). Hence, the two most abundant gases in [[air]] can be cooled by a J-T expansion at typical room temperatures.<ref name=Perry/>
 
It should be noted that <font style="vertical-align:-10%;"><math>\mu_{JT}</math></font> is always equal to zero for ideal gases. In other words, they will neither heat nor cool during an expansion through an insulated throttling device.
 
==Applications==
 
In practice, the Joule-Thomson effect is achieved by allowing the gas to expand through a throttling device (usually a valve) which must be very well insulated to prevent any heat transfer to or from the gas. External work must not be extracted from the gas during the expansion (meaning that the gas must not be expanded through a turboexpander).
 
The effect is applied in the [[Linde cycle]], a process used in the [[Petrochemicals|petrochemical industry]] for example, where the cooling effect is used to liquefy gases, and also in many [[cryogenic]] applications (e.g., for the production of [[liquid]] oxygen, nitrogen and [[argon]]). Only when the Joule-Thomson coefficient for the given gas at the given temperature is greater than zero can the gas be liquefied at that temperature by the Linde cycle. In other words, a gas must be below its inversion temperature to be liquefied by the Linde cycle. For this reason, a simple Linde cycle cannot normally be used to liquefy helium, hydrogen and [[neon]].
 
== References ==
{{reflist}}

Revision as of 14:03, 8 October 2009

This article has a Citable Version.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This version approved by three Editors (first, second and third) from at least one of the listed workgroups. The Engineering, Chemistry and Physics Workgroups are responsible for this citable version. While we have done conscientious work, we cannot guarantee that this version is wholly free of mistakes. See here (not History) for authorship.
Help improve this work further on the editable Main Article!

The Joule-Thomson effect or Joule-Kelvin effect describes the increase or decrease in the temperature of a real gas (as differentiated from an ideal gas) or a liquid when allowed to expand freely through a valve or other throttling device while kept insulated so that no heat is transferred to or from the fluid, and no external mechanical work is extracted from the fluid.[1][2][3][4] The Joule-Thomson effect is an isenthalpic process, meaning that the enthalpy of the fluid is constant (i.e., does not change) during the process.

It is named for James Prescott Joule and William Thomson, 1st Baron Kelvin who established the effect in 1852, following earlier work by Joule on Joule expansion in which a gas expands at constant internal energy.[5] The Joule-Thomson effect is sometimes referred to as the Joule-Kelvin effect. Engineers often refer to it as simply the J-T effect.

There is no temperature change when an ideal gas is allowed to expand through an insulated throttling device. In other words, the J-T effect does not apply for ideal gases.

Joule-Thomson inversion temperature

Isentropic expansion (meaning an expansion at constant entropy) — in which a gas does positive work in the process of expansion, — always causes a decrease in the gas temperature. For example, when gas is expanded through an expansion turbine (also known as a turboexpander), the temperature of the gas always decreases.

However, when a real gas (as differentiated from an ideal gas) expands through a throttling device, the temperature may either decrease or increase, depending on the initial temperature and pressure. For any given pressure, real gases have a Joule-Thomson inversion temperature:[1][3] above which the J-T expansion causes the temperature to rise, and below which the J-T expansion causes cooling. For most gases at atmospheric pressure, the inversion temperature is fairly high (above room temperature), and so most gases at those temperature and pressure conditions are cooled by the J-T expansion.

The Joule-Thomson coefficient

The change of temperature (T ) with a decrease of pressure (P ) at constant enthalpy (H ) in a Joule-Thomson process is the Joule-Thomson coefficient denoted as and may be expressed as:[2][3][4][6]

The value of is typically expressed in K/Pa or °C/bar and depends on the specific gas, as well as the temperature and pressure of the gas before expansion.

For all real gases, it will equal zero at some point called the inversion point and, as explained above, the Joule-Thomson inversion temperature is the temperature where the coefficient changes sign (i.e., where the coefficient equals zero). The Joule-Thomson inversion temperature depends on the pressure of the gas before expansion.

In any gas expansion, the gas pressure decreases and thus the sign of is always negative. With that in mind, the following table explains when the Joule-Thomson effect cools or heats a real gas:

If the gas temperature is then is since is thus must be so the gas
below the inversion temperature positive always negative negative cools
above the inversion temperature negative always negative positive heats

For some gases, the Joule-Thomson inversion temperatures at 1 atm are very low: for helium, about 51 K (−222 °C), and for hydrogen, about 202 K (-71 °C). Thus, helium and hydrogen will warm during a J-T expansion at typical room temperatures. On the other hand, nitrogen has an inversion temperature of 621 K (348 °C) and oxygen has an inversion temperature of 764 K (491 °C). Hence, the two most abundant gases in air can be cooled by a J-T expansion at typical room temperatures.[4]

It should be noted that is always equal to zero for ideal gases. In other words, they will neither heat nor cool during an expansion through an insulated throttling device.

Applications

In practice, the Joule-Thomson effect is achieved by allowing the gas to expand through a throttling device (usually a valve) which must be very well insulated to prevent any heat transfer to or from the gas. External work must not be extracted from the gas during the expansion (meaning that the gas must not be expanded through a turboexpander).

The effect is applied in the Linde cycle, a process used in the petrochemical industry for example, where the cooling effect is used to liquefy gases, and also in many cryogenic applications (e.g., for the production of liquid oxygen, nitrogen and argon). Only when the Joule-Thomson coefficient for the given gas at the given temperature is greater than zero can the gas be liquefied at that temperature by the Linde cycle. In other words, a gas must be below its inversion temperature to be liquefied by the Linde cycle. For this reason, a simple Linde cycle cannot normally be used to liquefy helium, hydrogen and neon.

References

  1. 1.0 1.1 Bimalendu Narayan Roy (2002). Fundamentals of Classical and Statistical Thermodynamics. Wiley. ISBN 0-470-84313-6. 
  2. 2.0 2.1 Wayne C. Edmister and Byunk Ik Lee (1984). Applied Hydrocarbon Thermodynamics, 2nd edition (Volume 1). Gulf Publishing. ISBN 0-87201-855-5. 
  3. 3.0 3.1 3.2 J. Bevan Ott and Juliana Boerio-Goates (2000). Chemical Thermodynamics: Principles and Applications, 1st Edition. Academic Press. ISBN 0-12-530990-2. 
  4. 4.0 4.1 4.2 Perry, R.H. and Green, D.W. (1984). Perry's Chemical Engineers' Handbook. McGraw-Hill Book Co. ISBN 0-07-049479-7. 
  5. J. P. Joule and W. Thompson (1853). "On the Thermal Effects of Fluids in Motion (Part I)". Philosophical Transactions of the Royal Society of London 143: 357-366. DOI:10.1098/rstl.1853.0014. Research Blogging.
  6. Joule Expansion (by W.R. Salzman, Department of Chemistry, University of Arizona)