Electric dipole: Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Paul Wormer
imported>Paul Wormer
Line 31: Line 31:
The potential field of a point dipole '''μ''' at a point '''R''' (a vector pointing from the dipole to an arbitrary in space, see the figure)  is given by
The potential field of a point dipole '''μ''' at a point '''R''' (a vector pointing from the dipole to an arbitrary in space, see the figure)  is given by
:<math>
:<math>
V_\mathrm{dip}(\mathbf{R})  = \frac{\boldsymbol{\mu}\cdot\mathbf{R}}{R^3}
V_\mathrm{dip}(\mathbf{R})  = \frac{\boldsymbol{\mu}\cdot\mathbf{R}}{4\pi \epsilon_0\,R^3}
</math>
</math>
where ''R'' is the length of '''R''' and the dot indicates the [[dot product]] between '''&mu;''' and  '''R'''.
where ''R'' is the length of '''R'''the dot indicates the [[dot product]] between '''&mu;''' and  '''R''', and &epsilon;<sub>0</sub> is the [[electric constant]] (vacuum permittivity).
===Proof===
===Proof===
The potential field of a point dipole can be determined fairly easily, see the figure for the symbols. In the equations we indicate vectors with bold letters, not with arrows on top as in the figure. The lengths of the vectors are indicated with the corresponding symbol in italics. Write
The potential field of a point dipole can be determined fairly easily, see the figure for the symbols. In the equations we indicate vectors with bold letters, not with arrows on top as in the figure. The length of a vector is indicated with the corresponding symbol in italics. Write
:<math>
:<math>
\begin{align}
\begin{align}
Line 60: Line 60:
The [[Coulomb's law|Coulomb potential]] at the point '''R''' is the sum of the potentials due to the two charges, which are of equal magnitude ''q'' and of opposite sign,
The [[Coulomb's law|Coulomb potential]] at the point '''R''' is the sum of the potentials due to the two charges, which are of equal magnitude ''q'' and of opposite sign,
:<math>
:<math>
V(\mathbf{R}) \equiv \frac{q_{-}}{|\mathbf{R}_1| } + \frac{q_{+}}{|\mathbf{R}_2| }  
\begin{align}
\approx \frac{q}{R} \left[ -1 + \frac{r}{2 R} \cos\theta  + 1 + \frac{r}{2 R} \cos\theta \right]
V(\mathbf{R}) \equiv& \frac{q_{-}}{4\pi \epsilon_0\,|\mathbf{R}_1| } + \frac{q_{+}}{4\pi \epsilon_0\,|\mathbf{R}_2| } \\
= \frac{q\; \mathbf{r}\cdot\mathbf{R} }{R^3} = \frac{\boldsymbol{\mu}\cdot\mathbf{R} }{R^3}
\approx& \frac{q}{4\pi \epsilon_0\,R} \left[ -1 + \frac{r}{2 R} \cos\theta  + 1 + \frac{r}{2 R} \cos\theta \right]
= \frac{q\; \mathbf{r}\cdot\mathbf{R} }{4\pi \epsilon_0\,R^3} = \frac{\boldsymbol{\mu}\cdot\mathbf{R} }{4\pi \epsilon_0\,R^3}
\end{align}
</math>
</math>
where we used
where we used

Revision as of 00:45, 18 August 2009

This article is a stub and thus not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
Code [?]
 
This editable Main Article is under development and subject to a disclaimer.

In chemistry, an electric dipole is a charge distribution consisting of two electric point charges of opposite sign and equal magnitude.

Often the requirement is added to the definition that the distance r between the two point charges must be "small"—one then speaks of a point dipole. Small is a relative concept and requires further specification. In general one is interested in the electric potential field due to the dipolar charge distribution at a distance R from the midpoint of the dipole. If it holds that r << R then, seen from the distance R, the dipolar charge distribution is a point dipole.

In physics, one meets the following related, but different, definition: a dipole of an electrostatic charge distribution ρ(r) is its first moment,

In this definition a dipole is a vector depending on the characteristics of the charge distribution.

Combining the two definitions, one considers two point charges: q1 at position r1 and q2 at position r2. The charge distribution is written in terms of Dirac delta functions

where the charges are of opposite sign and equal magnitude. The first moment of this charge distribution is

where we used q1 = −|q| and q2 = |q|.

This leads to a third possible definition: a dipole is a vector pointing from a negative electric point charge to a positive electric point charge, where both charges are of the same magnitude. The size (length) of the dipole is the distance between the point charges times the magnitude of the charges.

In chemistry dipole moments of molecules are often quoted to indicate charge separations in molecules. Usually chemists are only interested in absolute values, a large dipole indicates a highly polar molecule (much separation of charge), whereas non-polar molecules have negligible dipoles. In the rare case that the sign of a dipole plays a role, most (organic) chemists use a convention that is opposite to the convention just discussed: they let the dipole point from a positively charged region in the molecule to a negatively charged region.

Field of point dipole

The potential field of a point dipole μ at a point R (a vector pointing from the dipole to an arbitrary in space, see the figure) is given by

where R is the length of R, the dot indicates the dot product between μ and R, and ε0 is the electric constant (vacuum permittivity).

Proof

The potential field of a point dipole can be determined fairly easily, see the figure for the symbols. In the equations we indicate vectors with bold letters, not with arrows on top as in the figure. The length of a vector is indicated with the corresponding symbol in italics. Write

PD Image
Field of two point charges

Use the expansions, valid for x << 1,

Since r << R it follows that r/R << 1 and hence

The Coulomb potential at the point R is the sum of the potentials due to the two charges, which are of equal magnitude q and of opposite sign,

where we used