Oersted (unit): Difference between revisions

From Citizendium
Jump to navigation Jump to search
imported>Paul Wormer
m (wikilinks)
imported>Paul Wormer
No edit summary
Line 6: Line 6:
The magnetic field strength |'''H'''| in a point in vacuum is 1 Oe, if a unit magnetic pole in the point experiences a force of 1 [[dyne]] ( = 1&sdot;10<sup>&minus;5</sup> newton).  
The magnetic field strength |'''H'''| in a point in vacuum is 1 Oe, if a unit magnetic pole in the point experiences a force of 1 [[dyne]] ( = 1&sdot;10<sup>&minus;5</sup> newton).  


Later the oersted was redefined as the strength of the magnetic field at a distance of 1 centimeter from a straight conductor of infinite length and negligible circular cross section which carries a current of 0.5 [[abampere]] ( = 5 A).  
Later the oersted was redefined as the strength of the magnetic field at a distance of 1 centimeter from a straight conductor of infinite length and negligible circular cross section which carries a current of 0.5 [[abampere]] ( = 5 A) for cgs-emu and a current of 0.5 ''c'' [[statampere]] ( = 5 A) for Gaussian units. Here ''c'' is the speed of light (&asymp; 3&sdot;10<sup>10</sup> cm). This definition follows from the [[Biot-Savart law#Infinite straight conductor|Biot-Savart law]]:
:<math>
F = \begin{cases}
{\displaystyle \frac{2i}{r}}& \quad \hbox{cgs-emu units} \\
\\
{\displaystyle \frac{2i}{c r}}& \quad \hbox{Gaussian units}\\
\end{cases}
</math>
where ''r'' (in cm) is the distance of the field point to the conductor.  


The  [[Biot-Savart law#Magnetic field on axis of circular current|Biot-Savart law]]
The  [[Biot-Savart law#Magnetic field on axis of circular current|Biot-Savart law]]
Line 13: Line 21:
|\mathbf{H}| = \frac{2\pi i}{c r},
|\mathbf{H}| = \frac{2\pi i}{c r},
</math>
</math>
where ''c'' is speed of light. Hence, one may  give a third consistent definition for the Gaussian unit ''oersted''.  It is the magnetic field strength |'''H'''| in the center of a conducting loop with radius of 1 cm, carrying an electric current ''i'' of 1/(2&pi;) ampere. Note here that  ampere/''c'' (the [[statampere]]) is the unit of current and the centimeter is the unit of length  in the  Gaussian system of units.
where ''c'' is speed of light. Hence, one may  give a third consistent definition for the Gaussian unit ''oersted''.  It is the magnetic field strength |'''H'''| in the center of a conducting loop with radius of 1 cm, carrying an electric current ''i'' of c/(2&pi;) statA. (A very similar definition holds for the cgs-emu oersted).  


One oersted equals 1000/4π &asymp; 79.577&thinsp;47 A/m &nbsp; (ampere per meter, which is  the [[SI]] unit for |'''H'''|).  
One oersted equals 1000/4π &asymp; 79.577&thinsp;47 A/m &nbsp; (ampere per meter, which is  the [[SI]] unit for |'''H'''|).  


Before 1930 there was much confusion about the difference between the [[gauss (unit)|gauss]] (the cgs unit of [[magnetic flux density]] '''B''') and the oersted.  At its meeting in Stockholm in 1930 the Advisory Committee on Nomenclature of the International Electrotechnical Commission eliminated all ambiguity by adopting the gauss for the unit of magnetic flux density and the oersted for the unit of magnetic field strength.
Before 1930 there was much confusion about the difference between the [[gauss (unit)|gauss]] (the cgs unit of [[magnetic flux density]] '''B''') and the oersted.  At its meeting in Stockholm in 1930 the Advisory Committee on Nomenclature of the International Electrotechnical Commission eliminated all ambiguity by adopting the gauss for the unit of magnetic flux density and the oersted for the unit of magnetic field strength.

Revision as of 09:50, 28 May 2008

This article is developing and not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.

In physics, the oersted (symbol Oe) is the unit of magnetic field strength |H| in the cgs-emu (centimeter-gram-second electromagnetic unit) and Gaussian systems of units. The oersted is named for the Danish physicist Hans Christian Oersted.

There are different (consistent) definitions in the literature. The oldest definition is: The magnetic field strength |H| in a point in vacuum is 1 Oe, if a unit magnetic pole in the point experiences a force of 1 dyne ( = 1⋅10−5 newton).

Later the oersted was redefined as the strength of the magnetic field at a distance of 1 centimeter from a straight conductor of infinite length and negligible circular cross section which carries a current of 0.5 abampere ( = 5 A) for cgs-emu and a current of 0.5 c statampere ( = 5 A) for Gaussian units. Here c is the speed of light (≈ 3⋅1010 cm). This definition follows from the Biot-Savart law:

where r (in cm) is the distance of the field point to the conductor.

The Biot-Savart law in Gaussian units, for which in vacuum B = H, states that the field in the center of a conducting loop of radius r is,

where c is speed of light. Hence, one may give a third consistent definition for the Gaussian unit oersted. It is the magnetic field strength |H| in the center of a conducting loop with radius of 1 cm, carrying an electric current i of c/(2π) statA. (A very similar definition holds for the cgs-emu oersted).

One oersted equals 1000/4π ≈ 79.577 47 A/m   (ampere per meter, which is the SI unit for |H|).

Before 1930 there was much confusion about the difference between the gauss (the cgs unit of magnetic flux density B) and the oersted. At its meeting in Stockholm in 1930 the Advisory Committee on Nomenclature of the International Electrotechnical Commission eliminated all ambiguity by adopting the gauss for the unit of magnetic flux density and the oersted for the unit of magnetic field strength.