Tetration/Code/Polynomial25power

The metadata subpage is missing. You can start it via filling in this form or by following the instructions that come up after clicking on the [show] link to the right.

Do you see this on PREVIEW? then SAVE! before following a link.

To find out more about the use of metadata for the management of Citizendium pages, see CZ:Metadata.

You may see this box for one of two reasons. Either:

A - New page has been created, or subpages template was added to an existing page

B - Cluster move is in progress

Click either the A or B link for further instructions.

[Feel free to recommend improvements to the text or links in this template]

A - For a New Cluster use the following directions

Subpages format requires a metadata page.

Using the following instructions will complete the process of creating this article's subpages.

Click the blue "metadata template" link below to create the page.
On the edit page that appears paste in the article's title across from "pagename =".
You might also fill out the checklist part of the form. Ignore the rest.

For background, see Using the Subpages template Don't worry--you'll get the hang of it right away.
Remember to hit Save!

the "metadata template".

However, you can create articles without subpages. Just delete the {{subpages}} template from the top of this page and this prompt will disappear. :) Don't feel obligated to use subpages, it's more important that you write sentences, which you can always do without writing fancy code.

[Feel free to recommend improvements to the text or links in this template]

B - For a Cluster Move use the following directions

The metadata template should be moved to the new name as the first step. Please revert this move and start by using the Move Cluster link at the top left of the talk page.

The name prior to this move can be found at the following link.

[Feel free to recommend improvements to the text or links in this template]

// Generator of the upper right part of the figure 
// In order to generate the figure above, you need 
// the plotter routines
// ContourPlot/code/ado.cin , than makes the header of the eps file, and
// ContourPlot/code/conto.cin, that draws there the contour lines.
// With these routines, you may compile and execute the source below
//
// Copyleft 2008 by Dmitrii Kouznetsov
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#define DB double
#define DO(x,y) for(x=0;x<y;x++)
#include <complex.h>
#define z_type complex<double>
#define Re(x) x.real()
#define Im(x) x.imag()
#define I z_type(0.,1.)
z_type F4natu(z_type z) // polybonial approcimation
{ int K=51,k;
DB coef[51]={ 1.
, 1.091767351258322138
, 0.271483212901696469
, 0.212453248176258214
, 0.069540376139988952
, 0.044291952090474256
, 0.014736742096390039
, 0.008668781817225539
, 0.002796479398385586
, 0.001610631290584341
, 0.000489927231484419
, 0.000288181071154065
, 0.000080094612538551
, 0.000050291141793809
, 0.000012183790344901
, 0.000008665533667382
, 0.000001687782319318
, 0.000001493253248573
, 0.000000198760764204
, 0.000000260867356004
, 0.000000014709954143
, 0.000000046834497327
,-0.000000001549241666
, 0.000000008741510781
,-0.000000001125787310
, 0.000000001707959267
,-0.000000000377858315
, 0.000000000349577877
,-0.000000000105377012
, 0.000000000074590971
,-0.000000000027175982
, 0.000000000016460766
,-0.000000000006741873
, 0.000000000003725329
,-0.000000000001639087
, 0.000000000000858364
,-0.000000000000394374
, 0.000000000000200252
,-0.000000000000094420
, 0.000000000000047121
,-0.000000000000022563
, 0.000000000000011155
,-0.000000000000005391
, 0.000000000000002652
,-0.000000000000001289
, 0.000000000000000633
,-0.000000000000000309
, 0.000000000000000151
,-0.000000000000000074
, 0.000000000000000036
,-0.000000000000000018
};
z_type s=1.,t=z; 
for(k=1;k<=25;k++) { s+=coef[k]*t; t*=z; }	//only 25 terms are used
return s;
}
//
#include "conto.cin" 
main(){ int j,k,m,n; DB x,y, p,q, t; z_type z,c,d, cu,cd;
z_type Zo=z_type(.31813150520476413, 1.3372357014306895);
z_type Zc=z_type(.31813150520476413,-1.3372357014306895);
int M=150,M1=M+1;
int N=151,N1=N+1;
DB X[M1],Y[N1], g[M1*N1],f[M1*N1], w[M1*N1]; // w is working array.
char v[M1*N1]; // v is working array
FILE *o;o=fopen("TetrationPolynom25terms.eps","w");ado(o,0,0,124,124);
fprintf(o,"62 62 translate\n 20 20 scale\n");
//
DO(m,M1) X[m]=-3+.04*m;
DO(n,N1) Y[n]=-3+.04*(n-.5);
//
for(m=-3;m<4;m++) {	if(m==0){M(m,-3.1)L(m,3.1)}
			else	{M(m,-3)L(m,3)}			}
for(n=-3;n<4;n++) {M(  -3,n)L(3,n)} fprintf(o,".006 W 0 0 0 RGB S\n");
//
z_type tm,tp,F[M1*N1];
//
DO(m,M1)DO(n,N1){	g[m*N1+n]=9999;
			f[m*N1+n]=9999;
		}
for(m=0;m<M1;m++){x=X[m];
			DO(n,N1){y=Y[n]; z=z_type(x,y);
				c=F4natu(z); F[m*N1+n]=c;
				}
		}
//
DO(m,M1)
DO(n,N1){
		c=(F[m*N1+n]); p=Re(c); q=Im(c);
		if(p>-999 && p<999) g[m*N1+n]=p;
		if(q>-999 && q<999) f[m*N1+n]=q;
	}
//
p=1;q=99;
                 conto(o,f,w,v,X,Y,M,N, (-3*M_PI ),-q,q); fprintf(o,".04 W 1 0 1 RGB S\n");
                 conto(o,f,w,v,X,Y,M,N, ( -M_PI  ),-q,q); fprintf(o,".04 W 1 0 1 RGB S\n");
for(n=2;n<10;n+=2)conto(o,f,w,v,X,Y,M,N, (-3.+.1*n),-p, p); fprintf(o,".01 W 0 1 0 RGB S\n");
                 conto(o,f,w,v,X,Y,M,N, (-2.     ),-q ,q); fprintf(o,".03 W 1 0 0 RGB S\n");
for(n=2;n<10;n+=2)conto(o,f,w,v,X,Y,M,N, (-2.+.1*n),-p ,p); fprintf(o,".01 W 0 1 0 RGB S\n");
                 conto(o,f,w,v,X,Y,M,N, (-1.     ),-q,q); fprintf(o,".03 W 1 0 0 RGB S\n");
for(n=2;n<10;n+=2)conto(o,f,w,v,X,Y,M,N, (-1.+.1*n),-p ,p); fprintf(o,".01 W 0 1 0 RGB S\n");
                 conto(o,f,w,v,X,Y,M,N, (0.      ),-q,q); fprintf(o,".02 W 0 0 0 RGB S\n");
for(n=2;n<10;n+=2)conto(o,f,w,v,X,Y,M,N, (    .1*n),-p ,p); fprintf(o,".01 W 0 1 0 RGB S\n");
                 conto(o,f,w,v,X,Y,M,N, ( 1.     ),-q ,q); fprintf(o,".03 W 0 0 1 RGB S\n");
for(n=2;n<10;n+=2)conto(o,f,w,v,X,Y,M,N, ( 1.+.1*n),-p ,p); fprintf(o,".01 W 0 1 0 RGB S\n"); 
                conto(o,f,w,v,X,Y,M,N, ( 2.     ),-q ,q);  fprintf(o,".03 W 0 0 1 RGB S\n");
for(n=2;n<10;n+=2)conto(o,f,w,v,X,Y,M,N, ( 2.+.1*n),-p, p); fprintf(o,".01 W 0 1 0 RGB S\n");
                 conto(o,f,w,v,X,Y,M,N, ( M_PI   ),-q,q); fprintf(o,".04 W 1 0 1 RGB S\n");
                 conto(o,f,w,v,X,Y,M,N, (3*M_PI  ),-q,q); fprintf(o,".04 W 1 0 1 RGB S\n");
//
                 conto(o,g,w,v,X,Y,M,N, (-2.     ),-p,p); fprintf(o,".03 W 0 0 0 RGB S\n");
for(n=2;n<10;n+=2)conto(o,g,w,v,X,Y,M,N, (-2.+.1*n),-p,p); fprintf(o,".01 W 1 0 0 RGB S\n");
                 conto(o,g,w,v,X,Y,M,N, (-1.     ),-q,q); fprintf(o,".03 W 0 0 0 RGB S\n");
for(n=2;n<10;n+=2)conto(o,g,w,v,X,Y,M,N, (-1.+.1*n),-p,p); fprintf(o,".01 W 1 0 0 RGB S\n");
                 conto(o,g,w,v,X,Y,M,N, (0.      ),-q,q); fprintf(o,".03 W 0 0 0 RGB S\n");
for(n=2;n<10;n+=2)conto(o,g,w,v,X,Y,M,N, (    .1*n),-p,p); fprintf(o,".01 W 0 0 1 RGB S\n");
                 conto(o,g,w,v,X,Y,M,N, ( 1.     ),-q,q); fprintf(o,".03 W 0 0 0 RGB S\n");
for(n=2;n<10;n+=2)conto(o,g,w,v,X,Y,M,N, ( 1.+.1*n),-p,p); fprintf(o,".01 W 0 0 1 RGB S\n");
                 conto(o,g,w,v,X,Y,M,N, ( 2.     ),-p,p); fprintf(o,".03 W 0 0 0 RGB S\n");
                 conto(o,g,w,v,X,Y,M,N, ( 3.     ),-p,p); fprintf(o,".03 W 0 0 0 RGB S\n");
                 conto(o,g,w,v,X,Y,M,N, ( 4.     ),-p,p); fprintf(o,".03 W 0 0 0 RGB S\n");
//
//M(-10,0)L(-2,0)fprintf(o,".04 W 1 0 1 RGB S\n");
fprintf(o,"showpage\n\%\%\%Trailer"); fclose(o);
//system( "ggv TetrationPolynom25Terms.eps");    // for linux
//system(  "open TetrationPolynom25Terms.eps"); // for macintosh
system("ps2pdf TetrationPolynom25terms.eps");  
//getchar(); system("killall Preview"); //for macintosh
}
//
// end of plotting program
//

Tetration/Code/Polynomial25power

A - For a New Cluster use the following directions

B - For a Cluster Move use the following directions

Navigation menu

Search