Talk:Nuclear chemistry

Mark Rust has nominated Chemistry/Draft&oldid=100012889 this version of this article for approval. Other editors may also sign to support approval. The Chemistry Workgroup is overseeing this approval. Unless this notice is removed, the article will be approved on December 31, 2006.

Structure of this page

I'm a bit hazy: Is this not meant to be a general introduction to the topic, becuase I'm not 100% clear on the working group/discipline homepage/defacto category/list/whatever paradigm yet. I'm going to work on the presumption that it is meant to be an article first, please correct me if I'm wrong. - brenneman 06:14, 22 December 2006 (CST)

Hi Aaron, I was trying to write a short introduction to the area of chemistry with some examples to explain what nuclear chemistry is. I was hoping to include at least one example of each of the main areas of nuclear chemistry.Mark Rust

• Did some copyediting - not my field, but I think you need to get a Chemistry editor to oversee approval who has not worked on the article, according to CZ rules.

Think you need a longer lead, that can serve as an abstract of the whole article. The reference style is not worked out yet, but can you get web links to the cited references? Important for verificationGareth Leng 16:06, 23 December 2006 (CST)

References

• Do we have to use references which are on line references. My worry is that many references which are on line are ones which the normal reader has to pay to read (a bit like a pay per view system). I think that we should use a combination of books which could be obtained through a good science libary and references to journal articles.Mark Rust

• No clear rules on references and a combination is fine, but the content needs to be verified before approval, so linking makes this much easier (to an abstract is usually enough), and open access sources of course are ideal. I think we need to establish an expectation that Journal references will have been checked for CZ articles.Gareth Leng 09:06, 25 December 2006 (CST)

Hi, I saw with interest that you suggested that journal references should be checked as part of the process of apporving an article. I have used a large number of Elsevier journal references for writing the nuclear chemistry page, I do not know if you want to read each reference in full but if you want to look at the papers (or just the abstracts) then please go to [1]. I think that the idea of an editor who has had little to do with the writing making a judegment about the journal references is a good idea and should be a part of the peer review process which leads to the approval of a page.Mark Rust 05:40, 28 December 2006 (CST)

Further work

• I'd suggest that this article is not yet ready to be approved. The lead needs work, and there are several sections where the prose also has room for improvement. I'll probably not be able to do much over the next few days, but following from the new year I'm happy to work on this. - brenneman 16:29, 23 December 2006 (CST)
  • I see your point that the text is not perfect, but I am thinking that the content is better than the "nuclear chemistry" page at wikipedia. The page we have here is likely to provide the reader with a reasonable overview of the subject, I would like to know what we should be aiming to do. Should each page be an overview of a topic, or as detailed as a undergraduate textbook ?Mark Rust

    No question its much much better than WP, and to me as an outsider it looks like a good clear overview. I think that as we are preparing for the full launch, we need our approved articles to display all the qualities that we would aspire CZ should reach, we want to start with a high bar on approval (not unrealistically high, but these articles will be templates for what follows in the short term) ;-)Gareth Leng 09:06, 25 December 2006 (CST)

    And finally, no not all articles should be detailed and technical, and this article is a gateway into others so should be relatively simple and uncluttered with detail. We're aiming at all classes of article, from for the intelligent layman to for the expert, and an article shouldn't necessarily try to meet all these readers, it might help to state on the Talk page exactly the audience aimed at here, that would make feedback more focussed. Gareth Leng 09:10, 25 December 2006 (CST)

Outline

Proposed structure

Current structure

Early history Main areas Radiochemistry Radiation chemistry Study of nuclear reactions Radioisotope production Neutrons Other Uses The nuclear fuel cycle The study of used fuel Fuel cladding interactions Absorption of fission products on surfaces Spinout areas Kinetics (use within mechanistic chemistry) Uses within geology, biology and forensic science Nuclear magnetic resonance (NMR) References Text books

Early history Main areas Radiochemistry Radiation chemistry Study of nuclear reactions Radioisotope production Processes Slow neutrons Fast neutrons Fast protons, deuterons and other positive projectiles Formation by the decay of parent isotopes Uses Sealed sources The nuclear fuel cycle The study of used fuel Fuel cladding interactions Absorption of fission products on surfaces Spinout areas Kinetics Geology, biology and forensic science Nuclear magnetic resonance References Text books Radiochemistry and Nuclear Chemistry Radioactivity, Ionizing radiation and Nuclear Energy The Radiochemical Manual

Maybe if we could begin by talking about final article length, as well as the level of detail desired? I've whacked in the existing outline with a proto-ouline to the left. If everyone adds/takes away from the proposed until we're all happy? - brenneman 21:03, 27 December 2006 (CST)

Target audience

I think that we should aim for a person who is an undergraduate who has no prior experience of the topic. The article should be a mixture of text and pictures, I joke that a picture with a decent caption (plus decent text) is worth 10000 words. A pretty picture with no text which puts it in context is worth zero words.Mark Rust

I appear to fit your target audience to a tee (undergraduate in a science, but with little chemistry experience (tested out of Chem 101)). I'll be back before the 31st. Also, please sign with 4 tildes (~~~~) instead of 3, so that the date and time of your signature show up (this talk page will get really messy really fast if it's anything like Talk:Biology or Talk:Chiropractic. Happy Holidays --ZachPruckowski 01:59, 26 December 2006 (CST)

Whit is SIMFUEL exactly? I'm checking the references. Think it's looking good, it seems to make sense to me as a total stranger to it all. I played about with the layout a bit to get it more compact on the page. Think you need a lead image to go on the right of the contents list. Gareth Leng 10:40, 28 December 2006 (CST)

Dear Gareth, I have put an answer as to what SIMFUEL is on your talk page. I have a slight problem with a picture as it is difficult to get a copyright free picture. I may well e-mail someone I know and ask for some photos (which they are happy about releasing into the public domain).Mark Rust 10:46, 28 December 2006 (CST)

You might consider this? [2] or this [3]?Gareth Leng 11:17, 28 December 2006 (CST)