Marine Protector class cutter

From Citizendium
Jump to navigation Jump to search
This article is a stub and thus not approved.
Main Article
Discussion
Related Articles  [?]
Bibliography  [?]
External Links  [?]
Citable Version  [?]
 
This editable Main Article is under development and subject to a disclaimer.
(PD) Photo: USCG
USCGC Diamondback, a Marine Protector cutter, during her acceptance trials.

The United States Coast Guard maintains a class of 87 foot Marine Protector class cutters.[1][2] These cutters were built in the Bollinger shipyards in Louisiana. 65 cutters were supplied to the Coast Guard. Four cutters were supplied to the United States Navy. Two were supplied to Malta.

The Marine Protector class cutters are the smallest vessels in the Coast Guard's fleet that are classed as cutters.[1] The vessels have a complement of ten. They were built so that they could be staffed by mixed sex crews. The vessels are lightly armed, their main armament being two Browning M2 machines guns, mounted on pintles on either side of the bow.

The vessels were built with an innovative stern-launch ramp for their fast waterjet-powered pursuit craft.[1] The stern launch ramp enables the vessels to launch a boarding party without bringing the vessel to a halt. Similarly, the vessel's Short Range Prosecutor pursuit craft can drive back onboard the parent vessel, while it is still in motion. Launching and retrieving the pursuit craft requires just one individual to remain on deck.

References

  1. 1.0 1.1 1.2 Hunter C. Keeter. Acquisition Success Story: the Marine Protector-class Patrol Boat Project, United States Coast Guard, 2008-10, p. 1, 2. Retrieved on 2011-05-24. mirror
  2. Coastal Patrol Boat, United States Coast Guard, 2011-05-10. Retrieved on 2011-05-23. mirror